BGA-256 (Ball Grid Array 256-ball) is used for high-density ICs including FPGAs, processors, and memory chips where the
DPAK (TO-252) is a medium-power SMD package smaller than D2PAK for MOSFETs, linear regulators, and transistors handling
D2PAK (TO-263) is the SMD version of TO-220 for high-power MOSFETs, voltage regulators, and IGBTs. The large tab solders
QFN-32 (Quad Flat No-Lead 32-pin) has pads on the bottom edge of the package with a large exposed pad underneath for the
QFP-64 (Quad Flat Package 64-pin) is used for mid-complexity microcontrollers and FPGAs including STM32F103 (LQFP-64), A
QFP-44 (Quad Flat Package 44-pin) is an SMD IC package with pins on all four sides at 0.8mm pitch, used for microcontrol
SOT-23-5 extends the standard SOT-23 package with 5 pins for small op-amps (MCP6001, MAX4072), LDO regulators (MCP1700),
SOT-23 is the most common small SMD package for transistors (BC847, MMBT2222), small MOSFETs, diodes, and voltage refere
TO-247 is a large through-hole power package for high-power MOSFETs, IGBTs, and power transistors capable of handling cu
TO-92 is the small plastic through-hole package for low-power transistors (BC547, 2N2222, 2N3904), small signal MOSFETs,
TO-220 is the standard through-hole power package for voltage regulators (78xx, 79xx, LM317), power MOSFETs, transistors
SOIC-16 is the 16-pin SMD package equivalent of DIP-16, used for shift registers, multiplexers, display drivers, and log
SOIC-8 (Small Outline IC 8-pin) is the SMD equivalent of DIP-8, used for op-amps, voltage regulators, EEPROMs, and MOSFE
DIP-40 is a 40-pin through-hole package used for larger microcontrollers (ATmega16, ATmega32, Z80 CPU, 8051) and complex
DIP-28 is a 28-pin through-hole IC package used for microcontrollers (ATmega8, PIC16F877, ATmega328), EEPROMs, and large
DIP-16 is a 16-pin through-hole IC package used for multiplexers (74HC4051), shift registers (74HC595), display drivers,
DIP-14 is a 14-pin through-hole package used for quad logic gates (74xx series), quad op-amps (LM324), and small microco
DIP-8 (Dual In-line Package 8-pin) is the most common through-hole IC package used for op-amps (LM358, LM741), timers (N