The Neutrik powerCON TRUE1 is the updated IP65-rated locking AC connector with a true disconnect under load capability.
The Neutrik powerCON A (blue, NAC3FCA) is an input connector for AC power on stage and studio equipment. It is a locking
Push-in speaker terminals (also called spring terminals or cage clamps) are the standard speaker connection on budget an
DIN 41529 is the European standard 5-pin DIN connector for tape recorder connections, carrying stereo audio in and out o
The Speakon NL2 is the 2-pin version of the Neutrik Speakon speaker connector, carrying a single amplifier channel to a
The Tuchel T3 (DIN T3) is a vintage 3-pin circular connector used on classic Neumann and other European microphones from
The TA5F is a 5-pin mini XLR connector used on some wireless transmitters and professional headsets. Carries balanced au
The TA4F is a 4-pin mini XLR connector used on Shure wireless transmitter body packs for microphone and instrument input
The Hirose HR10 circular push-pull connector is used for audio connections on professional broadcast cameras (Sony, Pana
The 2.5mm TRRS connector is used as a balanced headphone output on portable audio players. Each channel has its own posi
The 4.4mm Pentaconn is a 5-pole balanced stereo headphone connector defined by JEITA RC-8141C. Used on Sony Walkman, iBa
A 3.5mm TRS connector with a threaded locking collar preventing accidental disconnection. Used on wireless transmitter b
The XLR Combo Jack accepts both XLR 3-pin balanced audio and 6.35mm TRS/TS unbalanced jacks in the same panel-mount open
The TRS insert connector uses a single 6.35mm TRS jack to simultaneously send and return a signal through an external pr
Standard 6.35mm TS cables carry unbalanced instrument signals from electric guitars, basses, and keyboards to amplifiers
Neutrik EtherCON is a locking rugged version of RJ45, used in live sound and broadcast environments where standard RJ45
DB25 25-pin D-sub connectors are used for 8-channel balanced analog audio multicore in professional recording studios. T
MOTU audio interfaces use DB25 connectors for 8-channel analog I/O following the Tascam wiring standard. A breakout cabl
The 6.35mm TS (Tip-Sleeve) mono connector is used for guitar, bass, and instrument cables. It carries an unbalanced high
The XLR 3-pin connector is the professional audio standard for balanced connections, providing excellent noise rejection
XLR 5-pin carries stereo balanced audio on a single connector, used for intercom systems, studio headset extensions, and
The XLR 4-pin connector is used for professional balanced stereo headphone outputs on headphone amplifiers, providing a
MIDI (Musical Instrument Digital Interface) uses a 5-pin DIN 180-degree connector for serial communication between synth
The 5-pin DIN 180-degree connector was used as the audio connector on European hi-fi equipment (tape decks, amplifiers,