OptiJack by Panduit is a fiber connector the same size as an RJ45 jack, allowing fiber and copper cabling to share the s
144-fiber MTP connectors use a 12-row MT ferrule for extreme density in hyperscale data center backbone cabling, aggrega
24-fiber MTP Elite connectors use higher-precision MT ferrule tolerances for lower insertion loss in high-density fiber
DWDM SFP+ modules use ITU-T DWDM channel wavelengths (C-band 1525-1565nm, 100 GHz or 50 GHz spacing) for wavelength-divi
CWDM SFP+ modules use CWDM wavelengths (1270-1610nm, 20nm spacing) for lower-cost WDM metro networks carrying up to 18 c
BiDi (Bidirectional) SFP uses a single fiber strand for both transmit and receive by using different wavelengths (WDM) f
800G OSFP uses eight 100 Gbps PAM4 lanes for 800 Gbps in the OSFP form factor, the leading edge of optical interconnect
QSFP112 uses four 112 Gbps PAM4 lanes for 400 Gbps in the standard QSFP form factor, enabling higher baud rate technolog
OSFP (Octal Small Form-factor Pluggable) is a high-density 400GbE transceiver using eight 50 Gbps lanes with an MPO-16 o
QSFP-DD (Quad SFP Double Density) doubles the QSFP28 density to 8 lanes for 400 Gbps. Backward compatible with QSFP28 mo
CFP2 is half the width of CFP providing the same 100 Gbps in a smaller package, enabling higher port density on line car
CFP (C Form-factor Pluggable) is a large MSA transceiver module for 100GbE and OTU4 carrying 100 Gbps over single-mode f
OC-192/STM-64 at 9.953 Gbps uses CFP (C Form-factor Pluggable) modules with LC connectors for highest-speed SONET/SDH tr
OC-48/STM-16 at 2.488 Gbps carries 48 OC-1 circuits over single-mode fiber with LC connectors, commonly used in long-hau
OC-12/STM-4 at 622.08 Mbps is four times OC-3 speed, carried over single-mode fiber with LC connectors. Used in metropol
OC-3/STM-1 at 155.52 Mbps is the base SONET/SDH rate carried over single-mode fiber with LC connectors. Used in legacy c
T1 Smart Jack (Intelligent Network Interface Device) is the demarcation point where the carrier network meets the custom
DS3 (T3) digital signal carries 28 T1 circuits at 44.736 Mbps over coaxial cable with BNC connectors. Used in carrier in
RJ21 50-pin connectors aggregate multiple SIP trunk lines or analog telephone lines in VoIP gateways and PBX systems, wh
Belden REVConnect uses a patented reversible termination method allowing the same core to terminate in any standard wiri
Krone 237A is a specific module format in the Krone LSA-PLUS family used in European telephone exchanges and building ca
Siemon MAX is a Cat6A and Cat7A keystone jack connector with a patented reverse-IDC termination design that reduces alie
Western Electric WE310 is the classic modular telephone handset cord connector used on North American telephone handsets
DIN 47256 is the standard German telephone connector used on telephone handsets and equipment in Germany before ISDN and