SC/PC (Subscriber Connector, Physical Contact) is the square push-pull fiber connector with flat polished 2.5mm ferrule.

FC/APC (Angled Physical Contact) uses an 8-degree angled ferrule polish for return loss greater than 60 dB, making it id

FC/PC (Physical Contact) single mode fiber connector uses a threaded screw coupling with a flat-polished ferrule for min

PXI Express chassis backplane provides the PCIe-based high-speed data bus, PXI trigger lines, 10 MHz reference clock, an

Keysight 82357B is a USB 2.0 to GPIB interface adapter allowing modern PCs to control GPIB instruments without a GPIB ca

Flying probe test systems use motorized probe arms with fine-tip probes that move to each test point under software cont

ICT (In-Circuit Test) bed-of-nails fixtures use spring-loaded pogo pins to simultaneously contact hundreds of test point

ATE (Automated Test Equipment) DUT (Device Under Test) board connectors provide the interface between the test handler a

USB logic sniffers (OpenBench Logic Sniffer, Saleae Logic) connect to PCBs via individual hook or pogo-pin leads with a

FTDI USB-Serial cable header is a 6-pin 2.54mm connector carrying USB-to-UART signals at 3.3V or 5V for programming Ardu