USB4 Gen 2x2 achieves 20 Gbps using two Gen 2 lanes (10 Gbps each) over USB-C. Supports DisplayPort 1.4 alt mode and USB
USB Type-C 3.2 Gen 2x2 bonds two 10 Gbps lanes for 20 Gbps total. Uses all four SuperSpeed lane pairs in the USB-C conne
USB OTG over Type-C uses the CC pins to negotiate data roles instead of the legacy ID pin. A USB-C cable with active CC
USB Type-C with USB 3.2 Gen 2 achieves 10 Gbps using improved 128b/132b encoding over two high-speed lane pairs. Common
USB Type-C with USB 3.2 Gen 1 provides 5 Gbps SuperSpeed data using 2 of the 4 high-speed lane pairs in the connector, a
USB Type-C in USB 2.0 mode uses only the D+ and D- pins of the 24-pin connector, providing 480 Mbps data and up to 15W c
The USB Micro-AB receptacle accepts both Micro-A and Micro-B plugs, allowing a device to act as either host (when Micro-
USB 3.0 Micro-AB receptacle accepts both USB 3.0 Micro-A and Micro-B plugs for OTG SuperSpeed devices. Allows 5 Gbps hos
USB 3.0 Micro-B adds a second 5-pin SuperSpeed connector alongside the standard Micro-B 2.0 connector body. Used on port
USB Micro-B 2.0 is the 5-pin thin connector used for charging and data on Android phones, cameras, and IoT devices from
USB Micro-A is the host-side OTG connector in the micro form factor. It has one flat side (asymmetric) and grounds the I
USB Mini-A is the host-side connector in USB OTG (On-The-Go) systems using the mini connector form factor. It has an asy
The 4-pin USB Mini-B connector is a pre-standard variant used on early digital cameras and devices before the 5-pin Mini
USB 1.1 Type-B is the original square device-side connector with beveled top corners. Used on printers and scanners befo
USB 3.2 Gen 2 Type-A achieves 10 Gbps using the same 9-pin Type-A connector as USB 3.0 but with improved encoding (128b/
USB 2.0 Type-A is the standard rectangular host-side connector supporting Hi-Speed at 480 Mbps. Found on virtually every
USB 3.0 Type-A (also called USB 3.1 Gen 1) adds 5 SuperSpeed pins to the 4 USB 2.0 pins in the same Type-A housing. Iden
USB 1.1 Type-A is the original rectangular host-side USB connector supporting Low Speed (1.5 Mbps) and Full Speed (12 Mb