M12 B-coded 5-pin connectors are used for PROFIBUS DP fieldbus connections on sensors, drives, and I/O modules. The B-co
SENT (Single Edge Nibble Transmission, SAE J2716) is a one-wire digital protocol for automotive sensors transmitting 12-
CAN FD (ISO 11898-1:2015) extends classic CAN by increasing data phase speed to 8 Mbps and frame payload to 64 bytes whi
Mechatrolink-III is a Japanese motion control fieldbus by Yaskawa using standard RJ45 connectors for synchronous servo d
INTERBUS (IEC 61158-2) is a serial ring fieldbus for factory automation using a 9-pin D-sub connector in a ring topology
LonWorks FTT-10 (Free Topology Transceiver) is a two-wire network for building automation running at 78 kbps supporting
BACnet IP (ASHRAE 135 Annex J) runs the BACnet protocol over standard IP networks using UDP port 47808, enabling buildin
BACnet MS/TP (Master-Slave/Token-Passing) uses RS-485 twisted pair for building automation networking between thermostat
POWERLINK (IEC 61158-6-13) is an open-source real-time Ethernet protocol using standard RJ45 connectors with cycle times
IO-Link hubs (Port Multipliers) expand a single IO-Link master port into multiple IO-Link device ports. They use M12 con