DMX512 (USITT DMX512-A) is the professional lighting control protocol using a 5-pin XLR connector for daisy-chaining up

HUB75 is the standard 16-pin IDC connector interface for RGB LED matrix panels used in scoreboards, advertising displays

LVDS 40-pin dual-channel connector is used on higher-resolution laptop displays (1920x1080 and above) requiring two LVDS

LVDS (Low Voltage Differential Signaling) 30-pin connector is used on older laptops (pre-eDP) for connecting LCD panels.

MIPI CSI-2 (Camera Serial Interface 2) 4-lane FPC connector carries high-speed camera image data from CMOS sensors to ap

MIPI DSI (Display Serial Interface) 4-lane FPC connector carries 4 high-speed differential data lanes plus clock for dri

eDP (Embedded DisplayPort) 1.4 is the standard interface between laptop motherboards and LCD panels using a 30-pin or 40

Power factor correction capacitor bank terminals connect capacitor stages to the AC bus for reactive power compensation,

Soft starter power terminals connect 3-phase supply to the thyristor power controller and motor output for controlled vo

Motor protection relay terminals connect CT secondary circuits, voltage inputs, trip outputs, and alarm contacts for pro