Coax-to-waveguide adapters transition from coaxial (SMA N-type or K-connector) to rectangular waveguide using a probe or

WR-28 rectangular waveguide covers Ka-band from 26.5 to 40 GHz used in satellite uplinks, automotive radar, and 5G mmWav

WR-90 rectangular waveguide carries X-band microwave signals from 8.2 to 12.4 GHz in a hollow metal tube. UBR120 or Cove

N-type precision connectors with tighter tolerance than commercial N-type provide better return loss and repeatability f

Satellite LNB (Low Noise Block) F connectors carry the L-band IF signal (950–2150 MHz) from the dish LNB to the satell

RG-11 F connectors are used for long CATV trunk runs where RG-6 attenuation is too high. The larger diameter cable and F

SMA end-launch (edge-launch) connectors solder to the edge of a PCB for coplanar waveguide or microstrip line launch up

Triaxial BNC has three concentric conductors (signal, guard, shield) for picoampere-level current measurements where cab

MHV (Medium High Voltage) connector looks similar to BNC but is rated for 3kV DC and is not compatible with standard BNC

SHV (Safe High Voltage) BNC-style connector is rated for 5kV DC with a recessed center pin that prevents accidental cont